back to projects
1970

Ford Mustang Mach 1

Full Restoration

This 1970 Mustang Mach 1 is an original Red over black, 351C car that came to us as a Grabber Green with terrible bodywork, and a shot 302. We're doing a complete rotisserie restoration on the car with a correct 351c engine built to NHRA Stock Eliminator spec. The goal was to increase the HP and keep things looking totally stock. We'll have a sneaky 400 HP under the hood but you would never know by looking at the totally stock engine compartment. Stay in tune for more updates!

  • Year: 1970
  • Make: Ford
  • Model: Mustang Mach 1

Engine specs:

351C block fully checked out and machined
351C stock crank crack checked and turned
351 new ARP rod bolts and new after market steel rods
Probe forged pistons, bearings, rings and balancing
All new gaskets through out the engine
Stock front cover with rebuilt stock water pump
Stock damper
Melling HV oil pump with oil pump drive
Stock replacment oil pan
Comp Cams custom hydraulic roller camshaft and lifters
Ford Racing indexable timing set
Comp Cams pushrods
Stock 351C rockers
351C head with new 2.19/1.71 stainless valves, new springs, retainrs and 10 degree locks
Hardened exhaust seats, three angle valve job, bowl porting with short side radius work
decks milled and the compression set at 9.0 to 1
stock 351c intake
New Holley carb with stock style distributor with Pertronics electronic module installed and new wires
Balanced and blue printed and assembled